Filter
Top Products
196 M7208 User Card
About line buttons
systems can have different types of line buttons. Match the line
buttons on your telephone with the ones below for instructions on how to use
them.
Internal calls using Intercom External calls using numbered line
1. Pick up the receiver.
buttons
2. If appears beside an Intercom
Pick up the receiver.
button, then dial.
2. When
appears beside a
OR
numbered Line button, then dial.
Press an Intercom button without
OR
then dial. Press a numbered Line button
without
then dial.
Note: Internal numbers are supplied by your System Coordinator.
Internal calls using extension
buttons
1. Pick up the receiver.
2. When
appears beside an
extension button, then dial.
External calls using extension
buttons
Pick up the receiver.
2. When
appears beside the
extension button, dial
q
(or your system’s external line
access code) and the number.
Holding Calls
1.
Press (Hold] . The beside the line on hold.
2.
Press the line button with the flashing return to the call.
Check the display for confirmation or additional information.
Automatic hold
Calls are put on hold automatically when you switch from one line to another.
This button operates the telephone’s built-in microphone and speaker in place
of the receiver. Your System Coordinator can program Handsfree to your
telephone.
Making calls
1.
instead of picking up the receiver.
Switching between Handsfree and handset
1.
and replace the handset to switch to Handsfree.
2 . Pick up the receiverto switch back.
Using Mute
1.
to turn the microphone OFF.
2.
again to turn the microphone ON.
Dialing without
lifting the handset
1.
Pressaline button without then dial your call.
2.
When answered, pick up the receiver, or press
3 . If the call is not answered, or the line is busy, press .
DR5.1 Owner’s Handbook
PO84262701