Filter
Top Products
81
You can program memory buttons for one-touch dialing of
internal or external telephone numbers.
External
1.
Press [Feature]
2.
Select the button you want to program. This is not necessary
for the
Telephone.
3.
If you want this autodialer to use a particular line or line pool,
select that line or line pool button. On the
Telephone,
you can only select a line pool button .
4. Enter the number.
5.
Press or [Hold].
Internal
1.
Press
2.
Select the button you want to program. This is not necessary
for the
Telephone.
3. Enter the number.
Displays
You will see some of the following displays while programming
an
button. See Dialing for displays that may occur while
using an
button.
Continue to enter digits until the
BKSP OK
number is complete. Press
or
to erase an incorrect
digit. Press or (Hold] when you
are finished.
The memory allotted to
numbers in your system is full.
PO842627 01
DR5.1 Owner’s Handbook