Filter
Top Products
206 Glossary
Autobumping:
A setting that
determines what the system
does with new Call Log items
when your Call Log is full. When
Autobumping is on, a new log
entry causes the oldest entry to
be deleted. If Autobumping is
off, your
system does
not log calls when your log is
full.
button:
A memory
button that, if programmed,
provides one-touch dialing of
external or internal numbers.
Automatic Dial:
A feature that
allows you to dial without having
to pick up the receiver or select
a line. You must have a Prime
line to use Automatic Dial.
Automatic Handsfree:
A
feature that automatically
activates Handsfree operation
when you make or answer a
call. Automatic Handsfree is
assigned in Administration
programming.
Automatic Hold:
A feature that
automatically places an active
call on hold when you select
another line. Automatic Hold is
programmed by your Customer
Service representative.
Automatic Privacy: See
Privacy.
Automatic Telephone
Relocation:
A feature that lets a
telephone retain its personal
and system programming when
it is plugged into a different
modular jack. Automatic
telephone relocation is enabled
by your Customer Service
representative.
Auxiliary ringer:
A separate
external telephone ringer or bell
that can be programmed to ring
when a line or a telephone
rings. An auxiliary ringer may be
programmed to ring only when
the system is in a particular
Service Mode. Programming of
an auxiliary ringer is done in
Administration programming
after the feature has been
enabled by your Customer
Service representative.
B
Background Music:
A feature
that lets you hear music from
the speaker of your
telephone. It is available only if
a music source has been
attached to the KSU and the
feature has been enabled by
your Customer Service
representative.
Owner’s Handbook
PO842627 01