Filter
Top Products
202 M7324 User Card
About line buttons
systems can have different types of line buttons. Match the line
buttons on your telephone with the ones below for instructions on how to use
them.
[Line]
internal calls using Intercom buttons External calls using numbered Line
1. Pick up the receiver.
buttons
2. If appears beside an Intercom
button, then dial.
1. Pick up the receiver.
OR
2. When appears beside a
Press an Intercom button without
numbered Line button, then dial.
OR
then dial.
Press a numbered Line button
without
then dial.
Note:
Internal numbers are supplied by your system coordinator.
Internal calls using extension
buttons
1. Pick up the receiver.
2. When
appears beside an
extension button, then dial.
External calls using extension
buttons
1. Pick up the receiver.
2. When
appears beside the
extension button, then dial
(or
your system’s external line access
code) and the number.
Holding Calls
1.
Press The beside the line on hold.
2.
Press the line button with the flashing to return to the call.
displayforconfirmation or additional information.
Automatic hold
Calls are put on hold automatically when you switch from one line to another.
This button operates the telephone’s built-in microphone and speaker in
place
of the receiver. Your System Coordinator can program Handsfree to your
telephone.
Making calls
1. Press instead of picking up the receiver.
Switching between Handsfree and handset
1.
Press and replace the handset to switch to Handsfree.
2.
Pick up the receiverto switch back.
Using Mute
1.
Press to turn the microphone OFF.
2. Press
again to turn the microphone ON.
Dialing without
Pressaline button without then dial your call.
lifting the handset
2.
When answered, pick up the receiver, or press
3.
If the call is not answered, line is
busy,
press
Owner’s Handbook
PO842627 01