Filter
Top Products
CHAPTER 6 ND-71762 (E)
Page 70
Issue 2
BASIC DATA ASSIGNMENT
Miscellaneous Data
1) Index 186:
b6 must be assigned as 1 (CCIS is in service). The remaining data should be determined depending on cus-
tomer’s requirements.
b0: 0/1 = CCIS Link Reconnection is not available/available.
When either of the two parties that are engaged in a Station-to-Station/Station-to-Trunk/Trunk-to-Trunk con-
nection via CCIS link transfers the call to another station, CCIS Link Reconnection will be provided. By es-
tablishing new link after the call transfer, the most proper routing can be provided for the two parties which
are eventually connected. Note 3, Note 4
0
b7
1
b6
0
b5
1
b4
0
b3
0
b2
1
b1
1
b0
Example (Index 186)
Station A
Station A
Station C
Station C
Station B
Station B
(1) Station A made a call to Station B
(1) Station A made a call to Station B
(2) Station B transferred the call to StationC
Link a
Link b
Link c
(3) Station B transferred the call to Station C
Node A
Node B
Node A
Node B
(4) Link Reconnection is provided between Station A and C, by using Link c.
At this time, LInk a and
b are released.
(4) Link between Station A and C is reestablished, and Link between Node A and B is released.
Exmaple 1:
1. A call between Station A and B is established.
2. Station B transfers the call to Station C.
3. After connecting to Station C, Station B hungs up.
4. Link between Station A and C is reestablished. At this time Link between Node A and B is released.
Exmaple 2:
1. A call between Station A and Station B is established.
2. Station B transfers the call to Station C.
3. After connecting to Station C, Station B hungs up.
4. Link c (between Station A and C) is reestablished. at this time, Link a and b are released.
In the following cases, Link Reconnection is provided:
(3) Station B hungs up
(3) Station B hungs up
07/31/02