Filter
Top Products
ND-71762 (E) CHAPTER 3
Page 29
Issue 2
SWITCH SETTING SHEETS
CHAPTER 3 SWITCH SETTING SHEETS
1. GENERAL
This chapter shows switch setting on the individual circuit cards used in the basic CCIS network (not including cir-
cuit cards related to Network through FCCS Groups and NEAX2000 IPS). These sheets are used when setting the
switches on the circuit cards during system installation.
The contents of the Switch Setting for each circuit card contains of the following information.
• Mounting slot(s) in the related Module
• Location of switches and switch setting positions
• Note(s) pertaining to switch positions
2. LIST OF CIRCUIT CARDS
Table 3-1 is the list of Circuit Cards required for CCIS features.
Please refer to “Circuit Card Manual” for more information.
Table 3-1 List of Circuit Cards for CCIS
SYMBOL CIRCUIT CARD REMARKS
CCH PA-2CCHA For Digital/Analog CCIS Line
CCT
PA-24CCTA For Digital CCIS Line (1.544 Mb/s)
PA-30CCTB For Digital CCIS Line (2.048 Mb/s)
DTI
PA-DTA/PA-24DTR For Digital CCIS Line (1.544 Mb/s)
PA-30DTS For Digital CCIS Line (2.048 Mb/s)
OSC PA-CK14 Oscillator (High precision oscillator for the 1-IMG system)
TSW PH-SW10
Time Division Switch
(Subordinate oscillator for the 1-IMG system)
PLO
PH-CK16 Subordinate Oscillator (for the 4-IMG system)
PH-CK17 High Precision Oscillator (for the 4-IMG system)