Filter
Top Products
ND-71762 (E) CHAPTER 1
Page 1
Issue 2
INTRODUCTION
CHAPTER 1 INTRODUCTION
1. GENERAL
This manual describes the installation procedures, maintenance, etc. for connecting No. 7 CCIS (Common Channel
Interoffice Signaling) lines to the PBX.
The configuration of this manual is described in Section 2: “HOW TO FOLLOW THE MANUAL” of this chapter.
2. HOW TO FOLLOW THE MANUAL
2.1 Configuration of the No. 7 CCIS System Manual
Note: Because the system name varies depending on the country to be provided, each system is described as fol-
lows in this manual.
Table 1-1 Configuration of the No. 7 CCIS System Manual
CHAPTER TITLE DESCRIPTION
1 INTRODUCTION Describes the No. 7 CCIS System Manual and how to use it.
2
GENERAL INFORMATION FOR
CCIS
Describes the specification and configuration of the PBX.
3 SWITCH SETTING SHEETS Describes the switch setting for each circuit card.
4 INSTALLATION PROCEDURE Describes how to connect CCIS lines to the PBX.
5
INSTALLATION TEST
PROCEDURE
Describes the PBX installation test procedure for CCIS.
6 BASIC DATA ASSIGNMENT Describes the basic data assignment for establishing CCIS link.
7
CCIS SERVICE FEATURES Describes the functions, operating procedure, and office data as-
signment procedure for each CCIS service feature.
8 MAINTENANCE PROCEDURE Describes the PBX maintenance procedure for CCIS.