Filter
Top Products
CHAPTER 4 ND-71762 (E)
Page 44
Issue 2
INSTALLATION PROCEDURE
3.5 Cable Running from PBX to the MODEM for Analog CCIS Line
Figure 4-13 Connection of MODEM Cables for Analog CCIS Line
START
By referring to Figure 4-15 through 4-16, confirm the connector name on the PIM backplane, then
connect the installation cable (25P) to the LT connector.
Connect the MODEM which is connected to analog CCIS line to the installation cable.
END
PBX
PA-2CCHA
LT CONNECTOR
INSTALLATION CABLE
MDF
MODEM