Filter
Top Products
1-19
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
4. If you are configuring the network settings on the
phone, you can set up an IP address for the phone by
either using DHCP or manually entering an IP
address.
Using DHCP—To enable DHCP and allow the DHCP
ser
ver to automatically assign an IP address to the
Cisco Unified IP Phone and direct the phone to a
TFTP server, choose Applications > Admin Settings
> Network Setup > IPv4 Setup and:
• To enable DHCP, set DHCP Enabled to Yes.
DHCP is enabled by default.
• To use an alternate TFTP server, set Alternate
TFTP Server to Yes, and enter the IP address for
the TFTP Server.
Note Consult with the network administrator to
determine whether you need to assign an
alternative TFTP server instead of using the
TFTP server assigned by DHCP.
Without DHCP—You must configure the IP address,
subn
et mask, TFTP server, and default router locally
on the phone, choose Applications > Admin Settings
> Network Setup > IPv4 Setup:
To disable DHCP and manually set an IP address:
a. To disable DHCP, set DHCP Enabled to No.
b. Enter the static IP address for phone.
c. Enter the subnet mask.
d. Enter the default router IP addresses.
e. Set Alternate TFTP Server to Yes, and enter the IP
address for TFTP Server 1.
You must also enter the domain name where the phone
resides by Choosing Applicat
ions > Admin Settings
> Network Configuration.
See the “Con
figuring Startup Network Settings” section
on page 3-13.
See the “Netw
ork Setup Menu” section on page 4-4.
5. Make calls with the Cisco Unified IP Phone.
Verifies that the phone and features work correctly.
Refer to Cisco Unified IP Phone 6921, 6941, and 6961
User Guide for Cisco Unified Communications Manager
7.1
6. Provide information to end users about how to use
their phones and how to configure their phone options.
Ensures that users have adequa
te information to
successfully use their Cisco Unified IP Phones.
See Ap
pendix A, “Providing Information to Users Via a
Website.”
Table 1-7 Installation Checklist for the Cisco Unified IP Phone 6921, 6941, and 6961 (continued)
Task Purpose For More Information