Filter
Top Products
7-7
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Status Menu
Step 4 Select Status > Network Statistics.
To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press the Clear softkey.
To exit the Network Statistics screen, press the Back softkey.
Ta ble 7-3 Network Statistics Message Information for the Cisco Unified IP Phone 6900 Series
Item Description
Tx Frames Number of packets sent b
y the phone
Tx Broadcasts Number of broadcast packets sent by the phone
Tx Unicast Total number of unicast packets transmitted by the phone
Rx Frames Number of packets rece
ived by the phone
Rx Broadcasts Number of broadcast packets received by the phone
Rx Unicast Total number of unicast packets received by the phone
Neighbor Device ID Identifier of a device connected t
o this port discovered by CDP
protocol.
Restart Cause—One of the
fol
lowing values:
Hardware Reset (Power-on reset)
Software Reset (memory controller
also reset)
Software Reset (memory controller
no
t reset)
Watchdog Reset
Unknown
Cause of the last reset of the phone
Port 1 Lin
k state and connection of the PC port (for example, Auto
100 Mb Full-Duplex
means that the PC port is in a link-up
state and has auto-negotiated a full-duplex, 100-Mbps
connection)