Filter
Top Products
1-15
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
Ta ble 1-6 Checklist for Configuring the Cisco Unified IP Phone 6921, 6941, and 6961 in Cisco Unified
Communications Manager
Task Purpose For More Information
1. Gather the following information about the phone:
• Phone Model
• MAC address
• Physical location of the phone
• Name or user ID of phone user
• Device pool
• Partition, calling search space, and location
information
• Number of lines and associated directory numbers
(DNs) to assign to the phone
• Cisco Unified Communications Manager user to
associate with the phone
• Phone usage information that affects phone
button template, softkey template, phone features,
IP Phone services, or phone applications
Provides list of configuration requirements for setting
up
phones.
Identifies preliminary configuration that you need to
perfo
rm before configuring individual phones, such as
phone button templates or softkey templates.
For more information, go to the “Cis
co Unified IP
Phones chapter in the Cisco U
nified Communications
Manager System Guide.
See the “T
elephony Features Available for the Cisco
Unified IP Phone” section on page 5-1.
2. Verify that you have sufficient unit licenses for your
phone.
For more information, go to the License Unit Report
chapter in the Ci
sco Communications Manager
Administration Guide.
3. Customize phone button templates (if required).
Changes the number of line buttons, speed-dial
bu
ttons, Service URL buttons or adds a Privacy button
to meet user needs.
For more information, go to the Ph
one Button Template
Configuration ch
apter in the Cisco Communications
Manager Administration Guide.
See the “Modi
fying Phone Button Templates” section on
page 5-14.
4. Add and configure the phone by completing the
required fields in the Phone Configuration window.
Required fields are indicated by an asterisk (*) next to
the field name; for example, MAC address and device
pool.
The device with its default settings gets added to the
Ci
sco Unified Communications Manager database.
For more information, go to the Cisco Uni
fied IP Phone
Configuration ch
apter in the Cisco Communications
Manager Administration Guide.
For information about Product Specific Configuration
fi
elds, refer to “?” Button Help in the Phone
Configuration window.
Note If you want to add both the phone and user to the
Cisco Unified Communications Manager
database at the same time, go to the User/Phone
Add Configuration chapter in the
Cisco Communications Manager Administration
Gu
ide.