Filter
Top Products
ix
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)
OL-3141-01
Preface
Overview
The Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)
provides the information you need to install, configure and manage the Cisco ATA 186 and
Cisco ATA 188 on a Skinny Client Control Protocol (SCCP) network.
This guide does not cover information related to the implementation of an SCCP Voice over IP (VoIP)
network.
Note The term Cisco ATA is used throughout this manual to refer to both the Cisco ATA 186 and the
Cisco ATA 188, unless differences between the Cisco ATA 186 and Cisco ATA 188 are explicitly stated.
Audience
This guide is intended mainly for service providers and network administrators who administer VoIP
services using the Cisco ATA. Many of these tasks impact the ability of the Cisco ATA to function on
the network, and require an understanding of IP networking and telephony concepts. However, some
end-user procedures are included where necessary with instructions to the administrator about how to
provide the end user with the pertinent information.
Organization
Table 1 provides an overview of the organization of this guide.
Table 1 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Administrator’s Guide (SCCP) Organization
Chapter Description
Chapter 1, “Cisco Analog Telephone Adaptor Overview” Provides descriptions of hardware and software features of
the Cisco ATA Analog Telephone Adaptor along with a brief
overview of the Skinny Client Control Protocol (SCCP).
Chapter 2, “Installing the Cisco ATA” Provides information about installing the Cisco ATA.
Chapter 3, “Configuring the Cisco ATA for SCCP” Provides information about how to configure the Cisco ATA
and the different configuration methods you can use.