Filter
Top Products
Contents
iv
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)
OL-3141-01
Installing the Cisco ATA 2-1
Network Requirements 2-2
Safety Recommendations 2-2
What the Cisco ATA Package Includes 2-2
What You Need 2-3
Installation Procedure 2-3
Power-Down Procedure 2-6
Configuring the Cisco ATA for SCCP 3-1
Default Boot Load Behavior 3-2
Specifying a Preconfigured VLAN ID or Disabling VLAN IP Encapsulation 3-3
Steps Needed to Configure the Cisco ATA 3-6
Basic Configuration Steps in a Cisco CallManager TFTP Server Environment 3-6
Basic Configuration Steps in a Non-TFTP Server Environment 3-7
Configuring the Cisco ATA Using a TFTP Server 3-7
Setting Up the TFTP Server with Cisco ATA Software 3-8
Configurable Features and Related Parameters 3-8
Parameters Not Used for SCCP 3-10
Creating a Cisco ATA Default Configuration File 3-10
Creating a Configuration File for a Specific Cisco ATA 3-12
Using atapname.exe Tool to Obtain MAC Address 3-13
Using the EncryptKey Parameter and cfgfmt Tool 3-14
Configuring the Cisco ATA to Obtain its Configuration File from the TFTP Server 3-15
Using a DHCP Server 3-15
Without Using a DHCP Server 3-17
Voice Configuration Menu 3-18
Using the Voice Configuration Menu 3-18
Entering Alphanumeric Values 3-20
Resetting the Cisco ATA to Factory Default Values 3-20
Cisco ATA Web Configuration Page 3-21
Resetting the Cisco ATA Using Cisco CallManager 3-23
Upgrading the SCCP Signaling Image 3-24
Adding the Cisco ATA to the Cisco CallManager 4-1
Adding Cisco ATAs Manually 4-2
Using the Cisco Bulk Administration Tool (BAT) 4-3
Using Auto-Registration 4-4