Filter
Top Products
3-8
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)
OL-3141-01
Chapter 3 Configuring the Cisco ATA for SCCP
Configuring the Cisco ATA Using a TFTP Server
Setting Up the TFTP Server with Cisco ATA Software
This section provides the procedure for the Cisco ATA administrator to obtain the correct Cisco ATA
software and set up the Cisco CallManager TFTP server with this software.
Procedure
Step 1 If you are a registered CCO user. go to the following URL:
http://www.cisco.com/cgi-bin/tablebuild.pl/ata186
Step 2 Download the zip file that contains the software for the applicable release and signaling image you are
using. The contents of each file are described next to the file name. Save the zip file onto a floppy disc.
Note The file that contains the protocol signaling image has an extension of .zup.
Step 3 Insert the floppy disc into the Cisco CallManager disc drive.
Step 4 From your computer, navigate to Start > Programs > Terminal Services > Client. The Terminal
Services Client screen appears.
Step 5 In the Services field of the Terminal Services Client screen, enter the IP address of the
Cisco CallManager that contains the disc you inserted. Then, click the Connect button. The Login
screen appears.
Step 6 Enter your login information, then click OK. The TFTP Path screen appears.
Step 7 Click on the My Computer icon that is located within the Terminal Services Client screen, then navigate
to the A: drive.
Step 8 From the A: drive, drag the zip file to the TFTP Path screen. This will extract all the files and place them
onto the Cisco CallManager TFTP server.
Configurable Features and Related Parameters
Table 3-5 lists, in alphabetical order, various features that you can configure for the Cisco ATA.
Table 3-5 also includes links to the related parameter that allows you to configure each of these features.
Each link takes you to a detailed description of the parameter that includes its default values.
For an example of how to configure parameters for the TFTP Server configuration method, see the
“Creating a Cisco ATA Default Configuration File” section on page 3-10.
Table 3-5 Configurable Features and Related Parameters
Configurable Features Related Parameters
Audio Media Features
• Low bit-rate codec selection (G.723.1, G.729)
• Silence suppression
• RTP media port configuration
Audio Media Parameters
• LBRCodec, page 5-11
• AudioMode, page 5-12
• MediaPort, page 5-27
Caller ID format CallerIdMethod, page 5-14
Debug and Diagnosis NPrintf, page 5-26, TraceFlags, page 5-27