5-6
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)
Ol-3141-01
Chapter 5 Parameters and Defaults
Network Parameters
Voice Configuration Menu Access Code
320
Related Parameters
• UseTFTP, page 5-4
• TftpURL, page 5-4
Network Parameters
This section describes the parameters for enabling or disabling the use of a DHCP server to obtain IP
address information, and parameters that you need to statically configure if you disable DHCP:
• DHCP, page 5-6
• StaticIp, page 5-7
• StaticRoute, page 5-7
• StaticNetMask, page 5-8
DHCP
Description
A DHCP server can be used to automatically set the Cisco ATA IP address, the network route IP address,
the subnet mask, DNS, NTP, TFTP, and other parameters.
• 1—Enable DHCP
• 0—Disable DHCP
Value Type
Boolean
Range
0 or 1
Default
1
Voice Configuration Menu Access Code
20
Related Parameters
• StaticIp, page 5-7
• StaticRoute, page 5-7
• StaticNetMask, page 5-8
• OpFlags, page 5-17 (bits 3 and 11)