Filter
Top Products
Index
IN-5
Cisco ATA 186 and Cisco 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)
OL-3141-01
S
safety recommendations 2-2
scaling factor calculation 5-22
SCCP
architecture
1-3
overview 1-2
version 1-5
SCCP/MGCP protocol selection 3-9
SCCP mode enabled 5-10
secondary Cisco CallManager configuration 5-9
secondary domain name server 5-16
services
basic
1-6
mid-call 1-7, 1-8, A-1, A-4
pre-call 1-7, A-1
services and related parameters 3-8
setting a password 3-19, 5-3
signaling image upgrade 3-24, 7-2
SigTimer parameter 5-19
silence suppression 3-8, 5-13
sk_example.txt file 3-10
sk_example.txt text file 5-2
software
downloading from CCO
3-7, 3-8
software specifications (all protocols) C-3
specifying a preconfigured VLAN ID 3-3
specifying VLAN CoS bit value (802.1P priority) for UDP
packets
3-4
specifying VLAN CoS bit value for TCP packets 3-4
speed dial A-2
standard payload type 5-13
statically configuring an IP address 5-7
statically configuring a route 5-7
statically configuring the Cisco ATA 3-19
Static IP 3-9
static IP configuration 5-7
StaticIP parameter 5-7
StaticNetMask parameter 5-8
static route configuration 5-7
StaticRoute parameter 5-7
static subnet mask configuration 5-8
T
terminal FXS lines 3-9
terminal-related Features 3-9
TFTP 3-9
TFTP Configuration 3-9
TFTP configuration 3-15
TFTP configuration file method 3-21
TFTP Encryption key 3-9
TFTP server
configuring to not use
5-4
configuring use of 5-4
TFTP server URL configuration 5-4
TftpURL parameter 3-16, 5-4
Throughput bit 5-17
timeouts 5-19
tone format 3-9
tones 5-21
syntax 5-21
TraceFlags parameter 5-27
trace logs 5-27
troubleshooting
general tips
8-1
U
UDP Type of Service (ToS) configuration 3-9
UIPassword parameter 3-14, 5-3, 8-6
unique configuration file 3-12
unused parameters 5-10
upgrading all Cisco ATAs at once 7-2
upgrading only one Cisco ATA 7-3
upgrading signaling image 7-2
upgrading software