5-7
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)
Ol-3141-01
Chapter 5 Parameters and Defaults
Network Parameters
StaticIp
Description
Configure the Cisco ATA IP address using this parameter if the DHCP parameter is set to 0.
Value Type
IP address
Default
0.0.0.0
Voice Configuration Menu Access Code
1
Related Parameters
• DHCP, page 5-6
• StaticRoute, page 5-7
• StaticNetMask, page 5-8
StaticRoute
Description
Configure the Cisco ATA statically assigned route in this parameter if the DHCP parameter is set to 0.
Value Type
IP address
Default
0.0.0.0
Voice Configuration Menu Access Code
2
Related Parameters
• DHCP, page 5-6
• StaticIp, page 5-7
• StaticNetMask, page 5-8