Filter
Top Products
5-26
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)
Ol-3141-01
Chapter 5 Parameters and Defaults
Optional Feature Parameters
ConfirmTone
Description
The Cisco ATA plays the confirm tone to prompt the user to enter a phone number when invoking a
supplementary service, such as call-forwarding, or blind transfer.
Default values for the nine-integer array
• ntone—1
• freq0—30467
• freq1—0
• level0—5970
• level1—0
• steady—0
• on-time—480
• off-time—480
• total time to play tone—1920
Voice Configuration Menu Access Code
925
NPrintf
Description
Use this parameter to specify the IP address and port of a host to which all Cisco ATA debug messages
are sent. The program prserv.exe, which comes bundled with the Cisco ATA software, is needed to
capture the debug information.
Syntax
<HOST_IP>,<HOST_PORT>
Example
If the program prserv.exe is running on a host with IP address 192.168.2.170 and listening port 9001, set
NPrintf to 192.168.2.170.9001. This causes the Cisco ATA to send all debug traces to that IP address.
Value Type
Extended IP address
Default
0
Voice Configuration Menu Access Code
81
Related Parameter
TraceFlags, page 5-27