Filter
Top Products
Index
IN-4
Cisco ATA 186 and Cisco 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)
OL-3141-01
manually upgrading signaling image 7-4
maximum number of digits in phone number 5-15
maximum on-hook time 5-20
MediaPort parameter 5-27
MeetMe conference A-3
mid-call service format 3-9
mid-call services
ATA style
A-6
Bellcore style A-4
VG248 style A-5
mid-call services style 5-14
minimum on-hook time 5-20
N
Named Signalling Event 3-9
network connectivity parameters 3-17
network requirements 2-2
network router probing 5-18
NSE 3-9
NSE payload type configuration 5-14
NumTxFrames parameter 5-17
O
obtaining non-dotted hexadecimal MAC address 3-13
Operating Parameters 5-6, 5-10
OpFlags parameter 5-17
outside dial tone 5-23
P
packet-precedence parameters 3-9
parameters and defaults x, 5-1
parameters for configuring basic IP connectivity 3-19
parameters not used for SCCP 3-10
parameter types 5-1
password
configuration
5-3
forgotten 5-3
password setting 3-19, 5-3
Phone Configuration screen 4-2, 4-3
phone number maximum digits 5-15
physical interfaces C-3
physical specifications C-1
polarity reversal before and after Caller ID signal 5-15
port enabling and disabling 5-8
port for debug messages
configuration
5-26
primary Cisco CallManager configuration 5-9
primary domain name server 5-15
prserv 6-8, 6-9
R
rc4 encryption algorithm 5-5
redial A-2
registration methods 4-1
Reliability bit 5-17
Reorder Tone 5-24
reorder tone 5-24
resetting the Cisco ATA 3-23
resetting the Cisco ATA to factory defaults 3-20
Ringback Tone 5-25
ring-cadence format 3-9
ringer cadence pattern 5-20
ringing characteristics C-3
RJ-45 LED
Cisco ATA 186
1-4
Cisco ATA 188 1-4
rtpcatch 6-12, 6-13, 6-15, 6-16, 6-17, 6-19
RTP frames 6-12
RTP media port configuration 3-8, 5-27
RTP packets 6-12
RTP packet size configuration 5-17
RTP payload type 5-13
RTP statistics 6-12