Filter
Top Products
CHAPTER
1-1
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)
OL-3141-01
1
Cisco Analog Telephone Adaptor Overview
This section describes the hardware and software features of the Cisco Analog Telephone Adaptor
(Cisco ATA) and includes a brief overview of the Skinny Client Control Protocol (SCCP).
The Cisco ATA analog telephone adaptors are handset-to-Ethernet adaptors that allow regular analog
telephones to operate on IP-based telephony networks. Cisco ATAs support two voice ports, each with
an independent telephone number. The Cisco ATA 188 also has an
RJ-45 10/100BASE-T data port.
This section covers the following topics:
• Overview of the Skinny Client Control Protocol, page 1-2
• Hardware Overview, page 1-3
• Software Features, page 1-5
• Installation and Configuration Overview, page 1-9
Figure 1-1 Cisco ATA Analog Telephone Adaptor
The Cisco ATA, which operates with Cisco voice-packet gateways, uses broadband pipes deployed
through digital subscriber line (DSL), fixed wireless, cable modem, and other Ethernet connections.
Note The term Cisco ATA refers to both the Cisco ATA 186 and the Cisco ATA 188, unless otherwise stated.
72209
ANALOG TELEPHONE ADAPTO
R
CISCO ATA 186