Filter
Top Products
5-10
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)
Ol-3141-01
Chapter 5 Parameters and Defaults
SCCP Mode Parameter
SCCP Mode Parameter
This parameter (UseMGCP) is located in the yellow portion of the Cisco ATA web configuration page.
The other parameters in this portion of the screen are not for SCCP.
UseMGCP
Description
Set this parameter to 0 if you are using the Cisco ATA as an SCCP client. (Set this parameter to 1 if you
are using the Cisco ATA as an MGCP client.)
Value Type
Boolean
Range
0 or 1
Default
0
Voice Configuration Menu Access Code
38
Other Parameters
This remaining parameters in the yellow portion of the configuration screen are not used for SCCP:
• CA0UID
• CA1UID
• MGCPVer
• RetxIntv
• RetxLim
• MGCPPort
• CodecName
Operating Parameters
The parameters described in this section include parameters for configuring codecs, fax features and
VLAN settings:
• LBRCodec, page 5-11
• PrfCodec, page 5-12
• AudioMode, page 5-12
• ConnectMode, page 5-13