Filter
Top Products
A-2
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)
OL-3141-01
Appendix A How to Use Pre-call and Mid-call Services
Procedures for Using Pre-call Services
Activate Call-Forward-All
Use this feature to send all calls from one telephone number to another telephone number. To activate
Call-Forward-All, follow these steps:
Procedure
Step 1 Press ** then 1 on your telephone keypad. You will receive a confirmation tone.
Step 2 Enter the telephone number to which you want to send the calls. A confirmation tone will sound.
Step 3 Hang up.
Cancel Call-Forward-All
To cancel Call-Forward-All, follow these steps:
Procedure
Step 1 Press ** then 2 on your telephone keypad. You will receive a confirmation tone.
Step 2 Hang up.
Redial
Use this feature to call the last number dialed. To activate Redial, press * then # on your telephone
keypad.
Speed Dial
To use Speed Dial, follow these steps:
Procedure
Step 1 Preset speed-dial commands by using the Cisco CallManager web page. (See Cisco CallManager
documentation for more information.) The Cisco ATA supports nine speed-dial numbers.
Step 2 To activate speed dialing, press * then a digit from one to nine on your telephone keypad, as shown in
the following examples:
• Press * then 1 to activate speed dial 1
• Press * then 2 to activate speed dial 2
• Press * then 3 to activate speed dial 3