Filter
Top Products
4-31
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
OL-15299-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
Procedure
Step 1 Press **# to unlock options on the CTL File menu.
If you decide not to continue, press **# again to lock options on this menu.
Step 2 Highlight the CTL option.
Step 3 Press the Unlock softkey to unlock the CTL file.
After you change and save the applicable TFTP server option, the CTL file will be locked automatically.
Note When you press the Unlock softkey, it changes to Lock. If you decide not to change the TFTP
server option, press the Lock softkey to lock the CTL file.
Trust List Menu
The Trust List menu displays information about all of the servers that the phone trusts and includes the
options that are described in Table 4-21.
If a CTL file is installed on the phone, you can access the Trust List menu by pressing the Settings button
and choosing Security Configuration > Trust List.
802.1X Authentication and Status
The 802.1X Authentication and 802.1X Authentication Status menus allow you to enable 802.1X
authentication and monitor its progress. These options are described in Table 4-22 and Table 4-23.
Table 4-21 Trust List Menu Settings
Option Description To Change
Unified CM/TFTP Server IP address of a Cisco Unified
Communications Manager and TFTP server
used by the phone. Also displays a certificate
icon if a certificate is installed for this
server.
For more information about these settings, refer
to the “Configuring the Cisco CTL Client”
section in Cisco Unified Communications
Manager Security Guide.
CAPF Server IP address of the CAPF used by the phone.
Also displays a certificate icon if a
certificate is installed for this server.
For more information about these settings, refer
to the “Configuring the Cisco CTL Client”
section in Cisco Unified Communications
Manager Security Guide.
SRST Router IP address of the trusted SRST router that is
available to the phone, if such a device has
been configured in Cisco Unified
Communications Manager Administration.
Also displays a certificate icon if a
certificate is installed for this server.
For more information about these settings, refer
to the “Configuring the Cisco CTL Client”
section in Cisco Unified Communications
Manager Security Guide.