Filter
Top Products
5-2
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
OL-15299-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Note Cisco Unified Communications Manager Administration also provides several service parameters that
you can use to configure various telephony functions. For more information about service parameters
and the functions that they control, refer to Cisco Unified Communications Manager Administration
Guide.
Table 5-1 Telephony Features for the Cisco Unified IP Phone
Feature Description Configuration Reference
Abbreviated dialing Allows users to speed dial a phone number by
entering an assigned index code (1-99) on the
phone keypad.
Users assign index codes from the User Options
web pages.
For more information, refer to:
• Cisco Unified Communications Manager
Administration Guide, “Cisco Unified IP
Phone Configuration” chapter.
• Cisco Unified Communications Manager
System Guide, “Cisco Unified IP Phone”
chapter.
Anonymous Call Block
(SIP phones only)
Allows a user to reject calls from anonymous
callers.
Cisco Unified Communications Manager
Administration Guide, “SIP Profile
Configuration” chapter.
Audible Message
Waiting Indicator
A stutter tone from the handset, headset, or
speakerphone indicates that a user has one or more
new voice messages on a line.
Note The stutter tone is line-specific. You hear it
only when using the line with the waiting
messages.
For more information, refer to:
• Cisco Unified Communications Manager
Administration Guide, “Message Waiting
Configuration” chapter.
• Cisco Unified Communications Manager
System Guide, “Voice Mail Connectivity
to Cisco Unified Communications
Manager” chapter.
Auto Answer Connects incoming calls automatically after a ring
or two.
Auto Answer works with either the speakerphone
or the headset.
For more information, refer to Cisco Unified
Communications Manager Administration
Guide, “Configuring Directory Numbers”
chapter.
Auto Dial Allows the phone user to choose from matching
numbers in the Placed Calls log while dialing. To
place the call, the user can choose a number from
the Auto Dial list or continue to enter digits
manually.
Auto-pickup Allows a user to use one-touch pickup functionality
for call pickup features.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, “Call Pickup” chapter.