Filter
Top Products
5-14
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
OL-15299-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Secure Conference • Allows secure phones to place conference calls
by using a secured conference bridge.
• As new participants are added by using
Confrn, Join, cBarge, Barge softkeys or
MeetMe conferencing, the secure call icon
displays as long as all participants use secure
phones.
• The Conference List displays the security level
of each conference participant. Initiators can
remove non-secure participants from the
Conference List. (Non-initiators can add or
remove conference participants if the
AdvanceAdhocConference parameter is set.)
For more information about security, see the
“Overview of Supported Security Features”
section on page 1-10.
For additional information, refer to these:
• Cisco Unified Communications Manager
System Guide, “Conference Bridges”
chapter
• Cisco Unified Communications Manager
Administration Guide, “Conference
Bridge Configuration” chapter
• Cisco Unified Communications Manager
Security Guide.
Services Allows you to use the Cisco Unified IP Phone
Services Configuration menu in Cisco
Unified Communications Manager Administration
to define and maintain the list of phone services to
which users can subscribe.
For more information refer to:
• Cisco Unified Communications Manager
Administration Guide, “Cisco Unified IP
Phone Configuration” chapter.
• Cisco Unified Communications Manager
System Guide, “Cisco Unified IP Phone
Services” chapter.
Services URL button Allows users to access services from a
programmable button rather than by using the
Services menu on a phone.
For more information refer to:
• Cisco Unified Communications Manager
Administration Guide, “Cisco Unified IP
Phone Configuration” chapter.
• Cisco Unified Communications Manager
System Guide, “Cisco Unified IP Phone
Services” chapter.
Shared line Allows a user to have several phones that share the
same phone number or allows a user to share a
phone number with a coworker.
For more information refer to Cisco Unified
Communications Manager System Guide,
“Cisco Unified IP Phones” chapter.
Silent Monitoring Allows a supervisor to silently monitor an active
call. The supervisor cannot be heard by either party
on the call. The user might hear an intermittent tone
(beep tone) during a call when it is being
monitored.
Note The intercom feature is disabled when a
call is being monitored or recorded.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, “Monitoring and
Recording” chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference