Filter
Top Products
4-14
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
OL-15299-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Line Settings Menu (SIP Phones Only)
The Line Settings menu displays information that relates to the configurable parameters for each of the
lines on a SIP phone. Table 4-7 describes the options in this menu.
Related Topics
• Displaying a Configuration Menu, page 4-2
• Device Configuration Menu, page 4-10
Call Preferences Menu (SIP Phones Only)
The Call Preferences menu displays settings that relate to the settings for the call preferences on a SIP
phone. Table 4-8 describes the options in this menu.
Table 4-7 Line Settings Menu Options
Option Description To Change
Name Displays the lines and the number used to
register each line.
Use Cisco Unified Communications Manager
Administration to modify.
Short Name Displays the short name configured for the line. Use Cisco Unified Communications Manager
Administration to modify.
Authentication Name Displays the name used by the phone for
authentication if a registration is challenged by
the call control server during initialization.
Use Cisco Unified Communications Manager
Administration to modify.
Display Name Displays the identification the phone uses for
display for caller identification purposes.
Use Cisco Unified Communications Manager
Administration to modify.
Proxy Address The value is left blank because it is not
applicable to SIP phones that are using Cisco
Unified Communications Manager.
Display only—Cannot configure.
Proxy Port The value is left blank because it is not
applicable to SIP phones that are using Cisco
Unified Communications Manager.
Display only—Cannot configure.
Shared Line Displays if the line is part of a shared line (Yes)
or not (No).
Display only—Cannot configure.
Table 4-8 Call Preferences Menu Options
Option Description To Change
Caller ID Blocking Indicates whether caller ID blocking is enabled
(Yes) or disabled (No) for the phone.
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
Anonymous Call Block Indicates whether anonymous call block is
enabled (Yes) or disabled (No) for the phone.
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
Call Waiting
Preferences
Displays a sub-menu that indicates whether call
waiting is enabled (Yes) or disabled (No) for
each line.
From Cisco Unified Communications Manager
Administration, choose Call Routing >
Directory Number.