Filter
Top Products
B-1
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
OL-15299-01
APPENDIX
B
Feature Support by Protocol for the Cisco
Unified IP Phones 7970 Series
This appendix provides information about feature support for the Cisco Unified IP Phones 7970 Series
using the SCCP or SIP protocol with Cisco Unified Communications Manager Release 7.0.
Table B-1 provides a high-level overview of calling features and their support by protocol. This table
focuses primarily on end-user calling features and is not intended to represent a comprehensive listing
of all available phone features.
Table B-1 also provides references to appropriate sections in Cisco Unified IP Phone 7970G/7971G-GE
User Guide for Cisco Unified Communications Manager 7.0, which is available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
Table B-1 Cisco Unified IP Phone 7970G/7971G-GE Feature Support by Protocol
Features
Cisco Unified IP Phone 7970G/7971G-GE
For More InformationSCCP SIP
Calling Features
Abbreviated Dialing Supported Supported “Basic Call Handling—Placing a Call: Additional
Options”
Anonymous Call Block Not supported Supported
Audible Message Waiting
Indicator
Supported Supported “Accessing Voice Messages”
Auto Answer Supported Supported “Using a Handset, Headset, and
Speakerphone—Using Auto Answer”
Auto-pickup Supported Supported
Auto Dial Supported Supported “Basic Call Handling—Placing a Call: Basic
Options”
Barge (and cBarge) Supported Supported “Advanced Call Handling—Using a Shared Line”
Block external to external
transfer
Supported Supported
Busy Lamp Field (BLF) Supported Supported “Advanced Call Handling—Using BLF to Determine
a Line State”
Busy Lamp Field (BLF)
Pickup
Supported Supported “Advanced Call Handling—Using BLF to Determine
a Line State”