Filter
Top Products
4-5
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
OL-15299-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
Related Topics
• Displaying a Configuration Menu, page 4-2
• Unlocking and Locking Options, page 4-3
• Editing Values, page 4-3
• Network Configuration Menu, page 4-5
• Device Configuration Menu, page 4-10
Network Configuration Menu
The Network Configuration menu provides options for viewing and making a variety of network settings.
Table 4-2 and Table 4-3 describe these options and, where applicable, explains how to change them.
For information about how to access the Network Configuration menu, see the “Displaying a
Configuration Menu” section on page 4-2.
Note The phone also has a Network Configuration menu that you access directly from the Settings menu. For
information about the options on that menu, see the “Network Configuration” section on page 4-25.
Before you can change an option on this menu, you must unlock options as described in the “Unlocking
and Locking Options” section on page 4-3. The Edit, Yes, or No softkeys for changing network
configuration options appear only if options are unlocked.
IP settings If you do not use DHCP in your network, you can make IP
settings manually.
Domain Name
IP Address
Subnet Mask
Default Router 1-5
DNS Server 1-5
TFTP settings If you do not use DHCP to direct the phone to a TFTP server,
you must manually assign a TFTP server. You can also
assign an alternative TFTP server to use instead of the one
assigned by DHCP.
TFTP Server 1
Alternate TFTP
TFTP Server 2
Table 4-1 Settings Configurable from the Phone (continued)
Category Description Network Configuration Menu Option