Filter
Top Products
8-7
Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 7.0
OL-15299-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Configuration
Headset enabled Indicates whether the Headset button is enabled on the phone.
User Locale Version Version of the user locale loaded on the phone.
Network Locale Version Version of the network locale loaded on the phone.
PC Port Disabled Indicates whether the PC port on the phone is enabled or disabled.
Speaker Enabled Indicates whether the speakerphone is enabled on the phone.
GARP Enabled Indicates whether the phone learns MAC addresses from Gratuitous
ARP responses.
Video Capability Enabled Indicates whether the phone can participate in video calls when
connected to an appropriately equipped PC.
Voice VLAN Enabled Indicates whether the phone allows a device attached to the PC port to
access the Voice VLAN.
Auto Line Select Indicates whether the phone shifts the call focus to incoming calls on
all lines.
DSCP for Call Control DSCP IP classification for call control signaling.
DSCP for Configuration DSCP IP classification for any phone configuration transfer.
DSCP for Services DSCP IP classification for phone-based services.
Security Mode Displays the security mode that is set for the phone.
Web Access Enabled Indicates whether web access is enabled (Yes) or disabled (No) for the
phone.
Span to PC Port Indicates whether the phone will forward packets transmitted and
received on the network port to the access port.
PC VLAN VLAN used to identify and remove 802.1P/Q tags from packets sent to
the PC.
CDP: PC Port Indicates whether CDP is supported on the PC port.
CDP: SW Port Indicates whether CDP is supported on the switch xport.
LLDP-MED: SW Port Indicates whether Link Layer Discovery Protocol Media Endpoint
Discovery (LLDP-MED) is enabled on the switch port.
LLDP: PC Port Indicates whether Link Layer Discovery Protocol (LLDP) is enabled
on the PC port.
LLDP Power Priority Advertises the phone’s power priority to the switch, enabling the
switch to appropriately provide power to the phones. Settings include:
• Unknown—default
• Low
• High
• Critical
LLDP Asset ID Identifies the asset ID assigned to the phone for inventory
management.
Table 8-2 Network Configuration Area Items (continued)
Item Description