Filter
Top Products
R5976214 VisuPlus Video Insertion Unit June 2003
6-18
6.6 Way of operations
Configuration of VISU
PLUS
Following describes the order in which the VISU
PLUS
has to be configured:
Check communication with the first V
ISU
PLUS
in the chain
VISU<CR>
Change baudrate if required
VISU SET_BAUDRATE <Value> <CR>
Configure the chain
VISU AUTO_CONFIG 0 <LastVisuNrInChain> <CR>
Updates disabled
VISU ENABLE_UPDATE 0 <CR>
Reinitialize V
ISU
PLUS
VISU OPU_SET_POS –1 –1 –1 <CR>
Define all hardware parameters
VISU HW_SET_PARAM <Parameter> <Value> <CR>
Define all Output-coordinates
VISU OPU_SET_POS <OpuNr> <X> <Y> <CR>
Define all Source parameters
VISU SRC_SET_PARAM <SrcNr> <SrcType> <Parameter> <Value> <CR>
Reset default links between input units → windows → sources
VISU IPU_LNK_TO_WIN –1 –1 <CR>
VISU WIN_LINK_TO_SRC –1 –1 <CR>
(Re-) Define links between input units → windows → sources
VISU IPU_LNK_TO_WIN <IpuNr> <WinNr> <CR>
VISU WIN_LNK_TO_SRC <WinNr> <SrcNr> <CR>
Define Windows position, size, viewport and priority starting with the one that has the lowest
priority.
VISU WIN_SET_POS <WinNr> <XStart> <YStart> <XEnd> <YEnd> <CR>
VISU WIN_SET_VIEWPORT <WinNr> <XStart> <YStart> <XEnd> <YEnd>
<CR>
VISU WIN_SHOW <WinNr> <Value> <CR>
VISU WIN_BRING_TO_TOP <WinNr> <CR>
Try update and solve bandwidth problems
VISU TRY_ENABLE_UPDATE <CR>
Enable (force) update
VISU ENABLE_UPDATE 7 <CR>