Barco R5976214 Intercom System User Manual


 
R5976214 VisuPlus Video Insertion Unit June 2003
1.3.2 Unpacking of Devices
Note advises on the packaging for unpacking!
1.3.3 Installation
Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious
damage to it.
Do not use this unit near water.
Use only the power cord supplied with your unit. While appearing to be similar, other power
cords have not been safety tested at the factory and may not be used to power the unit. For a
replacement power cord, contact your dealer.
Slots and openings in the cabinet and the sides are provided for ventilation; to ensure reliable
operation of the unit and to protect it from overheating, these openings must not be blocked or
covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or
other similar surface. This product should never be placed near or over a radiator or heat reg-
ister. This unit should not be placed in a built-in installation or enclosure unless proper ventila-
tion is provided.
The maximum recommended ambient temperature for this equipment is 40° C.
When using the unit in a multi-unit rack assembly or closed assembly the ambient temperature
inside the assembly may not succeed the maximum rated ambient temperature.
When installed in a rack, the installation should be such that the amount of airflow required for
safe operation of the equipment is not compromised. The mounting of the equipment should be
such that no hazardous condition is achieved due to uneven mechanical loading.
1.3.4 Servicing
Mechanical or electrical modifications others than described in this manual must not be made to
the devices. BARCO is not liable for damages resulting from modified devices.
Only authorized personnel should carry out other maintenance work not explicitly
mentioned in this installation manual!
Never open the case of V
ISU
PLUS
without first disconnecting the power supply cord!
Measurements and tests with the opened device may be carried out only in the
factory or by specially trained personnel, due to the dangers of electrical shock.
1.3.5 Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. See section
5.2 Cleaning for a cleaning instruction!
1.3.6 Re-Packing
Keep the original shipping carton and packing material; they will come in handy if you ever have
to ship your unit. For maximum protection, repack your set as it was originally packed at the fac-
tory.