Filter
Top Products
R5976214 VisuPlus Video Insertion Unit June 2003
3-8
3.2.3 Digital Output Unit MDR26
VISU
PLUS
can be equipped with digital output units with MDR26 connector for connecting digital
projection modules of an O
VERVIEW or ATLAS Display Wall.
Within a Visu
Plus
– Eos configuration the graphical information of Eos is also
inserted into the output unit of Visu
Plus
.
Each of these output units provides the facility for connecting one projection module.
Digital and analog output units may not be mixed within one Visu
Plus
or within
mulitple Visu
Plus
in the same chain!
Connectors
The digital output unit has two connectors. The RGB In connector [1] is to connect to a digital
graphic channel of E
OS within a VISU
PLUS
– EOS Setup. The Out connector [2] is to connect to the
projection module.
1 In
2 Out
Figure 3-8
digital output unit
Order
Analog output units are numbered in exactly the same way like the digital output units, see section
3.2.2 Digital Output Unit (DVI).
MDR26 Cable
The PanelLink cable is used to connect the Out connector [2] of the digital output unit with a digi-
tal projection module, see figure below.
Within a V
ISU
PLUS
– EOS setup a shorter version of the PanelLink cable (1.5 m) is used to connect
the digital output of E
OS with the In connector [1] of the digital input unit.
Figure 3-9
MDR26 to MDR26 cable