Filter
Top Products
R5976214 VisuPlus Video Insertion Unit June 2003
6-16
6.5.16 ENABLE_UPDATE
The ENABLE_UPDATE command enables or disables the updating of the Display Wall. When
disabled, values can be loaded to the V
ISU
PLUS
, but will not be updated on the Display Wall. When
enabled, a forced update will be done and loading new parmeters will every time update the Dis-
play Wall.
Use this command to disable screen-updates before loading new parameters to the V
ISU
PLUS
, and
enable it again afterwards to force a complete update.
The command must be used as follows:
Disable update.
Send all necessary window and source commands (WIN_SET_POS, WIN_SHOW,
WIN_TO_TOP).
Enable (force) update.
Syntax:
VISU ENABLE_UPDATE <Value> <CR>
VISU #X<Value> <CR>
Values:
Value Description
0 disable updating
7 enable (force) updating
Table 6-15
values of ENABLE_UPDATE command