Filter
Top Products
R5976214 VisuPlus Video Insertion Unit June 2003
6-14
6.5.15 SRC_SET_PARAM / SRC_GET_PARAM
The SRC_SET_PARAM command is used to configure source specific settings.
The SRC_GET_PARAM command is used to retrieve those settings.
Syntax:
VISU SRC_SET_PARAM <SrcNr> <SrcType> <Parameter> <Value> <CR>
VISU #N <SrcNr> <SrcType> <Parameter> <Value> <CR>
VISU SRC_GET_PARAM <SrcNr> <SrcType> <Parameter> <CR>
VISU #O <SrcNr> <SrcType> <Parameter> <CR>
Values of <SrcType>:
Value Description
3 video input
5 RGB input
Table 6-12
values of <SrcType> of SRC_SET_PARAM / SRC_GET_PARAM command
Video parameters and correlated values:
Parameter Value Description
0
0
1
source input type
BNC input
SVHS input
1 0..511 video contrast
2 -128..127 video brightness
4 -128..127 video hue
5 0..511 video chroma U
6 0..511 video chroma V
7
0
1
2
3
4
5
6
7
8
video format
auto
auto
PAL forced
PAL-N forced
PAL-N combination forced
PAL-M forced
NTSC-M forced
NTSC-Japan forced
SECAM forced
Table 6-13
video parameters of SRC_SET_PARAM / SRC_GET_PARAM command