Filter
Top Products
R5976214 VisuPlus Video Insertion Unit June 2003
3-6
3.2.2 Digital Output Unit (DVI)
There are three different types of output units for connecting to the projection modules of an
OVERVIEW or ATLAS Display Wall: digital output unit DVI, digital output unit MDR26 and ana-
log output unit.
To connect to digital projection modules the digital output unit DVI can be used.
Within a Visu
Plus
– Eos configuration the graphical information of Eos is also
inserted into the output unit of Visu
Plus
.
Each of these output units provides the facility for connecting one projection module.
Digital and analog output units may not be mixed within one Visu
Plus
or within
multiple Visu
Plus
in the same chain! Nevertheless digital output units with DVI
connector and with MDR26 connector can be used in the same device.
Furthermore in a VISU
PLUS
- EOS configuration the digital output unit DVI is able to loop through
DDC information from the display device to the E
OS.
Connectors
The digital output unit has two connectors. The In connector [1] is to connect to a digital graphic
channel of E
OS within a VISU
PLUS
– EOS Setup. The Out connector [2] is to connect to the projection
module.
1
2
1 In
2 Out
Figure 3-4
digital output unit (DVI)
Cable
The DVI-D to DVI-D cable is used to connect the Out connector [2] of the digital output unit
(DVI) with a digital projection module, see figure below.
Figure 3-5
DVI-D to DVI-D cable