Barco R5976214 Intercom System User Manual


 
R5976214 VisuPlus Video Insertion Unit June 2003
1.3 Safety Instructions
This section describes safety precautions, which must be observed when installing and operating a
product from BARCO.
1.3.1 Precautions
For your own protection, observe the following safety precautions when installing,
operating and servicing your device:
Before operating the units please read this manual thoroughly and retain it for future reference!
Observe all warnings and instructions printed on the devices!
Servicing not explicitly mentioned in this manual should never be carried out by unauthorized
personnel! Never open the case of the unit without first disconnecting the power supply cord!
To prevent fire or electrical shock hazard, do not expose this unit to rain or moisture!
This product should be operated from an AC power source!
This unit may be connected to an IT power system!
Check that the voltage and frequency of your power supply match those printed on the device
label with the rated electrical values!
If you are not sure of the type of AC power available, consult your dealer or local power com-
pany!
This product is equipped with a 3-wire grounding plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet.
Do not defeat the purpose of the grounding-type plug!
This equipment must be grounded (earthed) via the supplied 3 conductor AC power cable. (If
the supplied power cable is not the correct on, consult your dealer.)