Filter
Top Products
R5976214 VisuPlus Video Insertion Unit June 2003
3-14
VISU
PLUS
Load Cable (D9 – D9)
In order to upload the operating system to the VISU
PLUS
devices and control the VISU
PLUS
windows
(position and aspect ratio) a serial connection has to be established between the V
ISU
PLUS
and EOS
or the control PC.
The serial cable is also used to establish the serial connection between multiple V
ISU
PLUS
.
Figure 3-18
V
ISU
P
LUS
load cable
VISU
PLUS
Reset Cable (D25 – BNC)
The VISU
PLUS
reset cable is used to connect the parallel port of EOS and the control PC respectively
with the reset
in port [6] of the VISU
PLUS
. By means of this connection the VISU
PLUS
can be reset re-
motely.
Figure 3-19
V
ISU
P
LUS
reset cable