Samsung DS 5000 IP Phone User Manual


 
63
STORING A CALLER ID NUMBER
At any time during an incoming call that provides CID information, you may save
the CID number as a speed dial number in your personal speed dial list.To store a
Caller ID number in a personal speed dial bin:
Press the STORE button.The system displays the speed dial bin in which the
number was stored—OR—press the CID button and then press the SCROLL
button.
Press the STORE soft key.
The system displays the speed dial bin in which the number was stored.
NOTE:Your telephone system must have LCR correctly programmed to redial the
saved number.If LCR is not being used on your system, you will not be allowed to
STORE CID numbers.
INQUIRE CALLER ID PARK/HOLD INFO
If you are informed that an incoming call is on hold or has been parked for you,
you may view the Caller ID information before you retrieve the call.This may influ-
ence how you choose to handle the call.
From an idle keyset:
Press the INQUIRE button—OR—press the CID button and then the
INQUIRE soft key.
Dial the trunk number.
You may now answer the call by pressing the ANS button—OR—you may
use NND to view more information about this call—OR—you can return to
the idle condition by pressing IGNORE.
If you are on a call:
Press the INQUIRE button.Your existing call will go on hold—OR—press the
CID button and then the INQUIRE soft key to place the first call on hold.
Dial the trunk number.
You may now answer the call by pressing the ANS button—OR—you may
use NND to view more information about this call—OR—you can return to
the idle condition by pressing IGNORE.
NOTES:
1. If you are on an intercom call or you have Automatic Hold turned off, you
must finish the existing call or place it on hold before inquiring.
2. If you inquire about an outgoing call, you will receive a [call no longer avail-
able] display.
CALLER ID
SELECTING YOUR CALLER ID DISPLAY
You can decide if you want to see the Caller ID name or Caller ID number in the
display.Regardless of which one is selected,you can press the NND button to view
the other pieces of Caller ID information. To select the type of Caller ID informa-
tion you wish to view first.
With the handset on-hook, press TRANSFER and then dial 119.
Dial 0 for CID options,1 for ANI options,or 2 for CLI options.
Dial 0 if you do not wish to view CID information, 1 to view the NUMBER first
or 2 to view the NAME first.
Press TRANSFER to exit and store your selection.
VIEWING THE NEXT CALLER ID CALL
In the event that you have a call waiting or a camped-on call at your keyset, you
can press the NEXT button to display the Caller ID information associated with
the call in queue at you keyset. Either the CID name or CID number will show in
the display depending on you Name/Number selection.
To view Caller ID information for calls that have been camped-on to your keyset,
press the NEXT button.
SAVING THE CALLER ID NUMBER
At any time during an incoming call that provides CID information,you may press
the SAVE button to save the CID number. The system must be using LCR to dial
the saved number.
REDIALING A SAVED CALLER ID NUMBER
To redial a number that has been saved, press the SNR button or dial 17.
NOTES:
1. Your telephone system must be LCR correctly programmed to redial the
saved number.
2. If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before you begin.
62
Home Page
Table of Contents
ITP-5112L