Samsung DS 5000 IP Phone User Manual


 
PRIVACY RELEASE
This feature will allow another station to join in our conversation by releasing pri-
vacy on the C.O.from your phone.
To Release Privacy:
While you are talking on a C.O.line and you wish to have other internal parties (or
up to three) join the conversation.
Press the PRB button (the PRB button will light steady red). Inform the other
party that he/she may now join the conversation.
After the other party (or parties) has joined the conversation and you wish to
return privacy to the line so that no one else can join the conversation, press the
PRB button a second time, the PRB button will be off.
To Join a Non-Private Conversation:
When someone has informed you that you can join a conversation:
Press the C.O. line button that he/she has indicated.
OR
Dial the C.O. line number that he/she has indicated.
23
Dial 0 to cancel current condition OR
Dial 1-5 to select the forward type OR
Press UP or DOWN to select the forward type.
Press the right soft key to move the cursor.
Dial the destination number (e.g., 202) OR
Press UP or DOWN to select the destination
Press the right soft key to move the cursor
Dial 1 to set OR
Press UP or DOWN to select YES or NO
Press TRANSFER to store and exit
STATION CALL PICKUP
To pick up (answer) a call ringing at another station, lift the handset and dial 65
plus the extension number of the ringing phone.
If you have a DP key assigned with a station number, you only need to press this
DP key with the flashing light to answer this ringing station.
NOTE:If the Hot Keypad feature has been turned off,you must first lift the handset
or press the SPEAKER button before you begin dialing.
GROUP CALL PICKUP
To pick up (answer) a call ringing in any pickup group,lift the handset and dial 66
plus the desired group number or press the flashing GROUP PICKUP button if
available.
GROUP NUMBERS
01-20 OfficeServ 100 and OfficeServ 7100
01-99 OfficeServ 500 M
01-99 OfficeServ 500 L
01-99 OfficeServ 7200 and OfficeServ 7400
NOTES:
1. A group pickup button can have an extender for a specific pickup group.
2. If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before dialing the access code.
MY GROUP PICKUP
If desired, a new access code can be assigned to pickup ringing calls in the same
pickup group as you are in. Like “66” above except you do not need to dial the
desired group number. See your installation company for the assigned access
code.MY GROUP PICKUP: __________________.
22
Home Page
Table of Contents
DS 5000