Filter
Top Products
3635
SYSTEM MAINTENANCE
ALARMS
The OfficeServ 100,OfficeServ 500, and OfficeServ 7000 systems provide a feature
that self-checks for any failures.If a failure does occur in the software or hardware,
a fault error will be generated and buffered to an alarm report. During an alarm
state every phone with an assigned SYSTEM ALARM button will ring and cause
the SYSTEM ALARM button to flash amber. A phone with a display should be
used so that the alarm information can be viewed.When an alarm occurs,the user
can press the SYSTEM ALARM button to view and scroll through the alarms.This
will silence the audible part of the alarm, but the SYSTEM ALARM button will
continue to flash until your Service Company views and clears the alarms in the
alarm report located in the system software.
CUSTOMER SET RELOCATION ALLOW TABLE
Single
Line
DCS*, DS
& iDCS 64 AOM
iDCS 8B
iDCS 18B
iDCS 28B
ITP-5107S
ITP-5121D
ITP-5112L
DS5021D
DS5014D
DS5007S
Single
Line
YES
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
DCS*, DS
& iDCS 64
AOM
NO
YES
NO
NO
NO
NO
NO
NO
NO
NO
NO
iDCS 8B
NO
NO
YES
NO
NO
NO
NO
NO
NO
NO
NO
iDCS 18B
NO
NO
NO
YES
YES
NO
NO
NO
NO
NO
NO
iDCS 28B
NO
NO
NO
YES
YES
NO
NO
NO
NO
NO
NO
ITP-5107S
NO
NO
NO
NO
NO
YES
NO
NO
NO
NO
NO
ITP-5121D
NO
NO
NO
NO
NO
NO
YES
NO
NO
NO
NO
ITP-5112L
NO
NO
NO
NO
NO
NO
NO
YES
NO
NO
NO
DS5021D
NO
NO
NO
NO
NO
NO
NO
NO
YES
NO
NO
DS5014D
NO
NO
NO
NO
NO
NO
NO
NO
NO
YES
NO
DS5007S
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
YES
[DCS Keysets and 32 button AOM not supported on the OS 7100].
Home Page
Table of Contents
System Admin