Filter
Top Products
• With the handset on-hook, press TRANSFER and then dial 110.
• Dial 061 to turn ring preference on or 060 to turn it off.
• Press TRANSFER to store your selection.
From the LCD:
• Press MENU button.
• Scroll to SETUP option, press ENTER.
• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 and imme-
diately enter the option.
• Scroll to RING PREF,press ENTER to change option status.
• Press CANCEL to enter change and return to Main Configuration Menu—
OR—press END to return to idle screen.
AUTO ANSWER CO CALLS
This option will allow CO calls that directly ring your phone to auto answer.When
a CO call arrives at your station and this option set for ON your phone will sound
two beeps, the same as when a screened transfer is completed, and you will be
connected to the CO call. In order for this option to work the station must also be
programmed for auto answer (see S
et Answer Mode).
• Press MENU button.
• Scroll to SETUP option, press ENTER.
• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 and imme-
diately enter the option.
• Scroll to AUTO ANS CO CALL,press ENTER to change option status.
• Press CANCEL to enter change and return to Main Configuration Menu—
OR—press END to return to idle screen.
NOTE: Outside lines must ring your station directly for the Auto Answer CO to
work.Lines ringing a station group will not cause your phone to Auto Answer the
call.
DISPLAY SPEED DIAL NAME
This option allows you to view the name associated with a speed dial number as
it is dialed.
• With you handset on-hook, press TRANSFER and then dial 110.
• Press 111 to turn DISP SPDNAME on or 110 to turn it off.
• Press TRANSFER to store your selection.
From the LCD:
• Press MENU button.
• Scroll to SETUP option, press ENTER.
• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 and imme-
diately enter the option.
• Scroll to DISP SPDNAME, press ENTER to change option status.
• Press CANCEL to enter change and return to Main Configuration Menu—
OR—press END to return to idle screen.
CALLER ID REVIEW ALL
This feature allows display keyset users to review Caller ID information for calls
sent to their stations.This list can be from ten to fifty calls in a first in,first out basis.
The list includes calls that you answered and calls that rang your station but that
you did not answer.When reviewing this list, you can press one button to dial the
person back.The system must be using LCR to dial the stored number.
• With you handset on-hook, press TRANSFER and then dial 110.
• Press 121 to turn CID REVIEW ALL on or 120 to turn it off.
• Press TRANSFER to store your selection.
From the LCD:
• Press MENU button.
• Scroll to SETUP option, press ENTER.
• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 and imme-
diately enter the option.
• Scroll to CID REVIEW ALL,press ENTER to change option status.
• Press CANCEL to enter change and return to Main Configuration Menu—
OR—press END to return to idle screen.
SECURE OHVA
This option allows you to receive OHVA (Over Head Voice Announce) calls via the
speaker while you are on the handset.
• With your handset on hook, press TRANSFER and then dial 110.
• Press 131 to turn SECURE OHVA ON or 130 to turn it OFF.
• Press TRANSFER to savve your selection.
From the LCD:
• Press the MENU button from the idle screen.
• Select SETUP.
• Select STATION ON/OFF.
• Scroll to SECURE OHVA and press ENTER to change status.
• Press CANCEL to return to option Main Screen.
• Press the END to return to idle screen.
5554
Home Page
Table of Contents
ITP-5112L