Samsung DS 5000 IP Phone User Manual


 
CALLING YOUR SYSTEM OPERATOR
Dial 0 to call your system operator or group of operators.
If you want to call a specific operator, dial that person’s extension number.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the SPEAKER button before you begin dialing.
15
BUSY STATION CALLBACK
When you call another station and receive a busy signal:
Press the CBK button, if programmed, or dial 44.
When the busy station becomes free, your keyset will ring.
Lift the handset or press SEND to call the now idle station.
NOTES:
1. A callback will be canceled if not answered within 30 seconds.If you have set
a callback, your CBK button will light.
2. If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before dialing.
BUSY STATION CAMP-ON
When you call another station and receive a busy signal but you do not want to
wait for a callback:
MANUAL CAMP-ON
Press the CAMP button or dial 45.
The called station will receive off-hook ring tone repeated every few seconds
and its first available CALL button will flash green to indicate your call is wait-
ing.
Wait for the called party to answer.
The called station must release its first call or place it on hold before answer-
ing your camp-on.
NOTES:
1. If you receive No More Calls tone, that station has no available button to
accept your call.Hang up or leave a message.
2. If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before dialing.
AUTO CAMP-ON
When you want to automatically camp on to a busy station without pressing the
camp on button every time you call a busy station, you can set your phone for
auto camp-on.
With the handset on-hook, press TRANSFER and then dial 110.
Dial 081 to turn on auto camp-on or 080 to turn it off.
Press TRANSFER to store your selection.
14
Home Page
Table of Contents
DS 5000