Filter
Top Products
31
2. Dial the station number (e.g., 205) OR [205] NO ANS FWD
press UP or DOWN key to select the 010 SEC
station and press the right soft key OR OR
press ANS/RLS to select all stations [ALL] N
O ANS FWD
and press the right soft key 010 SEC
3. Press UP or DOWN key to select the [205] D
TMF DUR.
station timer and press the right soft key 0100 MS→
4. Enter the new value via the dial pad, [205] DTMF DUR.
e.g., 0300 and the system will return 0100 MS→0300
to step 2
5. Press TRSF to store and exit
programming OR press SPK to store
and advance to the next program
ADDING NAMES TO THE
TRANSLATION TABLE
This program allows the system administrator or technician to associate a CID or
ANI number received from the Central Office with a name programmed in this
translation table. If there is no match between a received number and a name in
this table,[no CID name] or [no ANI name] will be displayed.
The translation table consists of 1000 entries in the OfficeServ 500 M and
OfficeServ 7100, and OfficeServ 7200 and OfficeServ 7400 systems or 2000
entries in the OfficeServ 500 L system or 500 entries in the OfficeServ 100 sys-
tem with each entry comprised of a ten digit telephone number and a 16 digit
name. S
ee Program Station Names.
Open customer programming and follow the instructions below.
PROGRAM KEYS
UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next MMC.
HOLD - Used to clear previous entry.
ACTION DISPLAY
1. Press TRSF and then dial 728 TRANSLATION:(001
)
Display shows first entry DIGIT:
2. Dial entry number (e.g., 005 or 0005) TRANSLATION:(005)
OR use UP and DOWN to scroll DIGIT:_
through entries and press right
soft key to select entry
3. Enter telephone number and press TRANSLATION:(005)
right soft key to advance to name entry DIGIT:3054264100
OR enter telephone number and press
left soft key to return to step 2 above
4. Enter the name using the method TRANSLATION:(005)
in P
ro
gram Station Names
SAMSUNG TELECOM
and press right or left soft key to
return to step 2 above
OR
press SPK to save and advance
to next MMC
OR press TRSF to
save and exit programming
DEFAULT DATA: NONE
32
Home Page
Table of Contents
System Admin