Samsung DS 5000 IP Phone User Manual


 
From the LCD:
Press MENU button.
Scroll to SETUP option, press ENTER.
Scroll to STATION ON/OFF and press ENTEROR—you may dial 6 and
immediately enter the option.
Scroll to HOT KEYPAD, press ENTER to change option status.
Press CANCEL to enter change and return to Main Configuration Menu—
OR—press END to return to idle screen.
KEY CONFIRMATION TONE
You can hear a short beep (confirmation tone) each time you press a button on the
dial pad.This tone can be turned on or off.
While on-hook, press TRANSFER and then dial 110.
Dial 040 to turn tones off or 041 to turn tones on.
Press TRANSFER to store your selection.
Additional ring tones can be selected from the SOUND/SCREEN, “Keytone
Select”option.
REJOINING A PAGE
This feature allows you to hear the remaining portion of an ongoing internal page
after you return your keyset to idle.To enable this feature:
With the handset on-hook, press TRANSFER and then dial 110.
Dial 051 to turn this feature on or 050 to turn it off.
Press TRANSFER to store your selection.
From the LCD:
Press MENU button.
Scroll to SETUP and press ENTER.
Scroll to STATION ON/OFF and press ENTEROR—you may dial 6 and
immediately enter the option.
Scroll to PAGE REJOIN, press ENTER to change option status.
Press CANCEL to enter change and return to the Main Configuration Menu—
OR—press END to return to idle screen.
RING PREFERENCE
This feature automatically answers ringing calls when you lift the handset or press
the SEND button.This method will always answer calls in the order they arrived at
your keyset.When you turn ring preference off,you must press the flashing button
to answer a call, allowing you to answer calls in the order you choose.
5352
From the LCD:
Press MENU button
Scroll to SETUP option and press ENTER.
Scroll to STATION ON/OFF and press ENTEROR—you may dial 6 and
immediately enter the option.
Scroll to AUTO HOLD, press ENTER to change option status.
Press CANCEL to enter change and return to the Main Configuration Menu—
OR—press END to return to idle screen.
NOTE: Intercom calls can be automatically put on hold by pressing TRANSFER.
HEADSET OPERATION
Keyset users can switch between headset mode and handset mode. When using
headset mode,press the SEND and END buttons to answer and release calls.
With the handset on-hook, press TRANSFER and then dial 110.
Dial 021 to use the headset or 020 to use the handset.
Press TRANSFER to store your selection.
From the LCD:
Press MENU button.
Scroll to SETUP option and press ENTER.
Scroll to STATION ON/OFF and press ENTEROR—you may dial 6 and
immediately enter the option.
Scroll to HEADSET USE and press ENTER to change option status.
Press CANCEL to enter change and return to Main Configuration Menu—
OR—press END to return to idle screen.
Your keyset may be equipped with a Headset mode button. If it is so equipped
pressing this button while the button indicator is blank will cause the keyset to
enter headset mode and the button indicator to be lit solid to indicate this.
Pressing the button while the button indicator is lit solid will cause the keyset to
return to handset mode and the button indicator will go blank.
HOT KEYPAD
On your phone system your keyset’s keypad can be made “live”or “hot”so that it is
not necessary to lift the handset or press the SPEAKER button before you begin
dialing. Calls can be made and features activated by simply dialing the C.O. line
number, trunk group access code,intercom number or feature access code.
With the handset on-hook, press TRANSFER and then dial 110.
Dial 031 to turn the Hot Keypad on or 030 to turn it off.
Press TRANSFER to store your selection.
Home Page
Table of Contents
ITP-5112L