Samsung DS 5000 IP Phone User Manual


 
MANAGING KEY ASSIGNMENTS
You can view your key assignments and add extenders to some of your program-
mable keys for easy one touch operation of frequently used features.
While on-hook, press TRANSFER and then dial 107.
Use the VOLUME buttons to scroll through all of your programmable buttons
OR press the programmable button to which you want to add the extender.
When you reach a key listed below, dial the corresponding extender.
Press TRANSFER to store and exit programming.
Please refer to the Enhanced Display Programming Section
provided by your instal-
lation company when requested for a complete list of descriptions and extenders
for any keys you may have programmed on your keyset.
NOTE: Confirm that the cursor is placed correctly before you enter the extender.
LCR WITH CLEAR
When you are making an outside call using LCR and dial an incorrect digit,you can
press the CLEAR soft key to reenter the telephone number. You do not need to
redial 9 to reaccess LCR.
BACKSPACE WITH LCR
If you misdial while using LCR,you can delete digits shown in the display by press-
ing the BSPC soft key as many times as necessary.
53
DIAL 7 P Q R S 7
DIAL 8 T U V Q 8
DIAL 9 W X Y Z 9
DIAL := [ ]
NOTES:
1. When the character you want appears on the same dial pad key as the previ-
ous character, press UP to move the cursor one space to the right.
2. Other symbols are available for DIAL #.
To cancel an individual alarm and reminder message:
Press TRANSFER and then dial 112.
Dial alarm number 1, 2 or 3.
Press the HOLD button.
Press the TRANSFER button.
PERSONAL SPEED DIAL NAMES
Each personal speed dial number can have an 11 character name assigned to it.
This name is used to select the speed dial bin when you are dialing by directory.
Press TRANSFER and then dial 106.
Dial the speed dial bin number 00–49.
Write your message using the procedure described in Alarm Reminder Mes-
sages.
Press the TRANSFER button to store the speed dial name.
Repeat for each speed dial bin if necessary.
STATION NAMES
You can assign an 11 character name to your keyset.This allows other display key-
set users to call you using the directory dial feature.
To program a station name:
Press TRANSFER and then dial 104.
Enter the 11 character name using the procedure described in Alarm Remind
-
er Messages.
Press TRANSFER to store the name.
52
Home Page
Table of Contents
ITP-5121D