Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 311 [DCS] (Page 1 of 2)
MMC: 311
ASSIGN SIM PARAMETER
DCS
✓
✓✓
✓
CI
✗
✗✗
✗
CII
✗
✗✗
✗
816
✗
✗✗
✗
408i
✗
✗✗
✗
408
✗
✗✗
✗
Assigns and sets parameters for the serial interface module (SIM). Refer to tables 1–12, below.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Open programming and select 311
Display shows
[2
56] SIM PARA
SIM TYPE :DTE
2. Enter station number connected to SIM (e.g., 257)
from dial keypad
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
[257] SIM PARA.
SIM TYPE :DTE
3. Enter desired selection from table 1 (00–10, e.g. 01)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
[257] SIM PARA.
CALL MODE:AWITH
Refer to table 1 for your selected option and go to
the table indicated (e.g. 3) to enter required
value (e.g. 0) using dial keypad or by pressing UP or
DOWN key
Press RIGHT soft key to move cursor
[2
57] SIM PARA.
CALL MODE:MANUAL
4. Repeat step 3 for all required options (00–10 in table 1)
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
TABLE 1. SIM PARAMETER
00 SIM TYPE = Table 2
01 CALL MODE = Table 3
02 ANS MODE = Table 4
03 AUTO BAUD = Table 5
04 DTR CHECK = Table 6
05 ECHO = Table 7
06 PROTOCOL = Table 8
07 SPEED = Table 9
08 CHAR LENGTH = Table 10
09 PARITY = Table 11
10 STOP BIT = Table 12