Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 744 [DCS / Compact II] (Page 1 of 1)
MMC: 744 DECT REGISTRATION ON/OFF
DCS
33
CI
33
CII
33
816
77
408i
77
408
77
Allows DECT handset registration to be enabled on a keyphone system. If this MMC is not
opened and an attempt is made to register a DECT handset, an error message will be displayed.
The default passcode for registration can be changed using MMC 202, Change Feature Pass-
codes.
Caution: When you have finished registering handsets, run this MMC again to set the regis-
tration mode to DISABLE. This will prevent unauthorised access to this feature.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Open programming and select 744
Display shows
ENABLE DECT REG.
PASSCODE:
2. Enter passcode
If the correct code is entered the display shows
An incorrect code entry shows
ENABLE DECT REG.
PASSCODE:[[[[
ENABLE DECT REG.
DISABLE
ENABLE DECT REG.
PASSCODE ERROR
If the SYSTEM ID in MMC 737 (DECT System Code) has
not been set, this message will be displayed:
ENABLE DECT REG.
NO REG. SYSTEM ID
3. Dial 1 for ENABLE or 0 for DISABLE
OR
Press UP or DOWN key to select and press RIGHT
soft key
ENABLE DECT REG.
ENABLE
4.
Press TRSF key to exit
OR
Press SPEAKER button to store and advance to next
MMC
Default Data: DISABLE
Related Items: MMC 202 Change Feature Passcodes
MMC 737 DECT System Code
MMC 738 DECT Clear Registration
MMC 739 BSI Download
MMC 741 BSI Card Restart
MMC 742 BSI Status
MMC 743 DBS Status
MMC 745 BSI Carrier