Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 304 (Page 1 of 1)
MMC: 304 ASSIGN STATION /
TRUNK USE
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows trunks, on a per-station basis, to answer incoming calls, to dial out or to do both. If a sta-
tion is set to DIAL:NO, the station will not have the ability to place a call. If the station is set to
ANS:NO, the station cannot answer an incoming call.
Note: MMC 406, Trunk Ring Assignment, overrides this MMC for the Answer option.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Open programming and select 304
Display shows
[2
01] USE [701]
DIAL:YES ANS:YES
2. Dial the station number (e.g., 205)
OR
Press UP or DOWN key to select station and press
RIGHT soft key
[205] USE [7
01]
DIAL:YES ANS:YES
3. Dial the trunk ID number (e.g., 704)
OR
Press UP or DOWN key to select trunk and press
RIGHT soft key
[205] USE [704]
DIAL:YES ANS:YES
4. Press UP or DOWN key to select YES/NO option
OR
Dial 1 for YES or 0 for NO and press RIGHT soft key
to move cursor to ANS option
Press UP or DOWN key to select YES/NO
Option
OR
Dial 1 for YES or 0 for NO and press RIGHT soft key
to return to step 2
[205] USE [704]
DIAL:NO ANS:YES
[205] USE [704]
DIAL:NO ANS:NO
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: DIAL = YES
ANS = YES
Related Items: MMC 316 Copy Station Usable
MMC 406 Trunk Ring Assignment
MMC 722 Station Key Programming
MMC 723 System Key Programming