Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 706 (Page 1 of 2)
MMC: 706 SYSTEM SPEED DIAL
BY NAME
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows a name, up to 11 characters, to be entered for each system speed dial number you set
up. This name enables the number to be located when using the directory dial feature. The direc-
tory dial feature allows the display keyset user to select a speed dial number by searching for the
name.
Names are written using the keypad. Each key press selects a character and moves the cursor to
the next position. For example, if the name is “SAM SMITH”, press the number “7” four times to
get the letter “S”. Now press the number “2” once to get the letter “A” Continue selecting charac-
ters from the keypad to complete your name. Press the programmable “A” key to toggle between
upper and lower case text.
Tip: When the character you want is on the same key as the previous character you typed in, press the UP
key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
#
space
& ! : ? . , % $ - < > / =
[ ] @ ^ ( ) _ + { } | ; "
→
`
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
TRSF Used to store and exit MMC
“A” Key #19 (24B keyset), or key #7 (12B keyset), or key #1 (6B keyset)
toggles upper and lower case text
”F” Used to toggle to MMC 705
Keys “A” to “F” are keys #19 to #24 on a 24B keyset, or keys #7 to #12 on a 12B keyset, or
keys #1 to #6 on a 6B keyset