Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 714 (Page 2 of 3)
ACTION DISPLAY
1. Open programming and select 714
Display shows
DID DIGIT (001)
DGT:2QQ
2. Enter valid entry number (e.g. 005 or 05) via dial keypad
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
DID DIGIT (005)
DGT:
3. Enter the DDI number (e.g. 4603831) via dial keypad
and press RIGHT soft key to move cursor
(Max. digits is 12)
DID DIGIT (005)
DGT:4603831
4. Enter day destination via dial keypad (e.g. 204)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
DID DIGIT (005)
→D:204 N:B
5. Enter night destination via dial keypad (e.g. 204)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
DID DIGIT (005)
→D:204 N:204
6. Enter 1 for YES (call waiting) or 0 for NO (no call wait-
ing)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
DID DIGIT (005)
CW: NO DELETE:0
7. Enter digits to be deleted via dial keypad (e.g. 3)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
DID DIGIT (005)
CW: NO DELETE:3
8. Enter name using above table and press RIGHT soft
key to return to step 2
DID DIGIT (005)
NAME:_
9. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC